City of Monett Flushing Program

City of Monett Flushing Program

The City of Monett is starting a flushing program for the water system.  We are using a process called Unidirectional Flushing (UDF).  UDF is designed to bring the water through the system in a controlled fashion at velocities sufficient to provide a scouring action within the distribution piping.  The technique consists of isolating a particular pipe section or loop (typically through closing appropriate valves) and exercising the hydrants in an organized, sequential manner generally progressing from the treatment plant or source well to the periphery of the system.  This sequential manner allows the dirty material to be flushed out of the pipe as the process is moved along and limiting stirring up water in areas that have not been cleaned. 

This process will help remove scale and debris from our pipes and valves. This improves the quality of our drinking water by providing better chlorine treatment.

When our crews are working in your neighborhood, you may experience water that is murky due to the process.  When we finish in that area, the City recommends running your water for a few minutes from a hydrant or tub.  If you use a sink be aware you may need to remove the aerator as there could be small particles in the water that could cause your aerator to get clogged.  Also, be sure to run cold water until it is clear so you don’t pull the water with some color to it into your hot water heater.  The City does not recommend washing clothes, especially whites, when we are in the area doing this work. 

Areas Affected: 
South of the Golf Course between Eisenhower & Chapel/Farm Road 1090 (Starting Wednesday Morning 5/18, will be working on this section of town)

For questions, contact City Hall at 417-235-3763.